16'' 600LB Big Size Gear Operated Ball Valve Carbon Steel
Product Description
| Design standard | API6D,ASME B16.34,BS5351,ISO17292,DIN |
| Connection ends | RF,RTJ flange,butt-welded,thread,socket welded |
| Actuator | manual,pneumatic,electric,gas-liquid interaction etc. |
| Nominal diameter | 2” – 48” (DN 50-DN 1200) |
| Pressure range | CLASS 150 – CLASS 2500 (Mpa 1.6- Mpa 42.0) |
| Materials | WCB,WCC |
| Application | petroleum,natural gas,chemical,petrochemical,power station,
metallurgy,papermaking etc. |
Feature
Upstream Seal Two-way Valve
VT trunnion mounted ball valve has two seats on both sides. Each
seat has springs loaded and make
seat insert contact the ball surface for sealing. So the valve is
bi-directional sealing and no limitation
for installation.
Fire-Safe Design API607/API6FA
When the seat inserts are softened and burnt in case of the fire or
unusual temperature increase,
the seat retainer under the duty of the spring, which will can
prevent internal leak. Meanwhile,
the middle flange,the upper & lower part of the stem will form a
metal-metal contact which can
prevent external leak conformed to API6FA or API607.
Stem and Seat Emergency Sealant Injection
The seat ring and the valve stem have a special grease injection
valve. In case of the leakage,
the grease will be injected to the valve ball surface and stem room
to create a temporary sealing.
Double Block and Bleed
The trapped cavity pressure can bleed out by vent fitting or drain
plug when the valve is in
fully open or fully closed position. The fluid is intercepted by
seats of up and down stream
side. So the stem packing or O-ring may be replaced under working
pressure. Each seat works
independently assuring tight seal against ball on both upstream and
downstream side.
Actuator Selection
Part of Product Display Area
FAQ:
Q1: What’s your MOQ?
A: Low MOQ,1 Set.
Q2: Can you provide OEM and customized product?
A: Yes, we can.
Q3: Do you offer guarantee for the products?
A: Yes, we offer 1 year warranty to our products.
Q4: Why Choose Weite Valve?
A: 1. We are manufactory, we can provide cost effective products.
2. We have full experience in valve industrial, both our sales team
and technical engineers can provide you
professional solution.
